Shear Strength of Hybrid Fiber Reinforced Self-Compacting Concrete Beams
DOI:
https://doi.org/10.5433/1679-0375.2023.v44.48549Keywords:
self-compacting concrete, shear, synthetic fibers, concrete structures, beamsAbstract
Self-compacting concrete has constructive advantages over conventional concrete, such as reducing labor and construction time, mainly because of its fluidity in the fresh state. However, in the hardened state, it maintains low performance when tensioned, and the fibers can be added to the mixture, maintaining a portion of the resistance after cracking. Steel fibers are usually added to concrete, but recently synthetic fibers have been used, due to their lower cost and non-corrosive nature, but with lower tensile strength. Thus, by combining the two types of fibers, the benefits of each material can be used. This work presents the results of an experimental program to evaluate the effect of the hybridization of metallic and synthetic fibers on the shear strength of self-compacting concrete beams without stirrups. The results demonstrate that both steel and hybrid fibers result in greater shear strength compared with the reference concrete without fibers before shear crack formation; however, the greatest advantages are attributed to post-cracking residual strength. The experimental results were compared with estimates calculated using equations published in the literature, demonstrating the feasibility of using some existing equations for concretes with the addition of hybrid fibers.
Downloads
References
American Concrete Institute. (2014). Committee 318: Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14). American Concrete Institute.
American Society for Testing and Materials. (2014). ASTM Standard C469/C469M-14 Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression. ASTM International.
Ashour, S. A., Hasanain, G. S., &Wafa, F. F. (1992). Shear Behavior of High-Strength Fiber Reinforced Concrete Beams. ACI Structural Journal, 89, 176–184. DOI: https://doi.org/10.14359/2946
Blunt, J., Jen, G., & Ostertag, C. P. (2015). Enhancing corrosion resistance of reinforced concrete structures with hybrid fiber reinforced concrete. Corrosion Science, 92, 182–191. DOI: https://doi.org/10.1016/j.corsci.2014.12.003
Brown, M. C., Ozyildirim, H. C., & Duke, W. L. (2010). Investigation of Steel and Polymer Fiber Reinforced Self-Consolidating Concrete. In C. M. Aldea & L. Ferrara (Eds.), Sp 274: Fiber reinforced self-consolidating concrete: Research and applications (Chap. 6). American Concrete Institute.
Dev, A., & Sabeena, M. V. (2018). Mechanical Properties of Hybrid Fiber Reinforced Concrete. International Research Journal of Engineering and Technology, 5(4), 2164–2168.
European Committee for Standardization. (2004). EN 1992-1-1: Eurocode 2: Design of Concrete Structures: Part 1-1—General Rules and Rules for Buildings. European Committee for Standarization.
European Federation for Specialist Construction Chemicals and Concrete Systems. (2005). The European Guidelines for Self-Compacting Concrete Specification, Production and Use. www.efnarc.org
Fehling, E., Schmidt, M., Walraven, J., Leutbecher, T., & Fröhlich, S. (2014). Ultra-High Performance Concrete UHPC: Fundamentals, Design, Examples. Wilhelm Ernst & Sohn. DOI: https://doi.org/10.1002/9783433604076
Ferrara, L., Dozio, D., & Di Prisco, M. (2007). On the connections between fresh state behavior, fiber dispersion and toughness properties of steel fiber reinforced concrete. In H. W. Reinhardt, & A. E. Naaman (Eds.), Fifth International RILEM Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC5) (pp. 249–258). Rilem.
Hossain, K. M. A., Lachemi, M., Sammour, M., & Sonebi, M. (2013). Strength and fracture energy characteristics of self-consolidating concrete incorporating polyvinyl alcohol, steel and hybrid fibres. Construction and Building Materials, 45, 20–29. DOI: https://doi.org/10.1016/j.conbuildmat.2013.03.054
Imam, M., Vandewalle, L., Mortelmans, F., & van Gemert, D. (1997). Shear domain of fiber-reinforced high-strength concrete beams. Engineering Structures, 19(9), 738–747. DOI: https://doi.org/10.1016/S0141-0296(96)00150-2
Jen, G., Trono, W., & Ostertag, C. P. (2016). Self-consolidating hybrid fiber reinforced concrete: Development, properties and composite behavior. Construction and Building Materials, 104, 63–71. DOI: https://doi.org/10.1016/j.conbuildmat.2015.12.062
Khuntia, M., Stojakinovic, B., & Goel, S. (1999). Shear Strength of Normal and High-Strength Fiber Reinforced Concrete Beams without Stirrups. ACI Structural Journal, 96, 282–289. DOI: https://doi.org/10.14359/620
Kobayashi, K., & Cho, R. (1982). Flexural characteristics of steel fiber and polyethylene fiber hybrid-reinforced concrete. Composites, 13, 164–168. DOI: https://doi.org/10.1016/0010-4361(82)90054-4
Kwak, Y., Eberhard, M. O., Kim, W., & Kim, J. (2002). Shear Strength of Steel Fiber Reinforced Concrete Beams without Stirrups. ACI Structural Journal, 99, 530–538. DOI: https://doi.org/10.14359/12122
Lantsoght, E. O. L. (2019). Database of shear experiments on steel fiber reinforced concrete beams without stirrups. Materials, 16(6), 917. DOI: https://doi.org/10.3390/ma12060917
Laufer, I. d. G., & Savaris, G. (2021). Shear strength of steel fiber self-compacting concrete beams. Semina: Ciências Exatas E Tecnológicas, 42(1), 45–62. DOI: https://doi.org/10.5433/1679-0375.2021v42n1p45
MM Fibers. (2023). Fibers for concrete. https://mmfibras.com.br/
Narayanan, R., & Darwish, I. Y. S. (1987). Use of Steel Fibers as Shear Reinforcement. ACI Structural Journal, 84(3), 216–227. DOI: https://doi.org/10.14359/2654
Okamura, H., & Ouchi, M. (2003). Self-Compacting Concrete. Journal of Advanced Concrete Technology, 1(1), 5–15. DOI: https://doi.org/10.3151/jact.1.5
Pauw, P., Taerwe, L., Van den Buverie, N., & Moerman, W. (2008). Steel fibre concrete as an alternative for traditional shear reinforcement in pretensioned concrete beams. In R. Gettu (Ed.), BEFIB 2008 Proceedings (pp. 887–898). RILEM Publications. DOI: https://doi.org/10.1201/9781439828434.ch12
Rambo, D. A. S., Silva, F. D. A., & Toledo Filho, R. D. (2014). Effect of steel fiber hybridization on the fracture behavior of self-consolidating concretes. Cement and Concrete Composites, 54, 100–109. DOI: https://doi.org/10.1016/j.cemconcomp.2014.02.004
Rando, J., A. M., Guerra, L., & Morales, G. (2019). Interference from the addition of polypropylene fibers and thin basalt on mechanical strength of micro concrete. Semina: Ciências Exatas e Tecnológicas, 40(1), 55–62. DOI: https://doi.org/10.5433/1679-0375.2019v40n1p55
Salvador, R. P., & Figueiredo, A. D. (2013). Análise comparativa de comportamento mecânico de concreto reforçado com macrofibra polimérica e com fibra de aço. Matéria, 18, 1273–1285. DOI: https://doi.org/10.1590/S1517-70762013000200003
Sharma, A. K. (1986). Shear strength of steel fiber reinforced concrete beams. ACI Journal, Proceedings, 83, 624–628. DOI: https://doi.org/10.14359/10559
Singh, B., & Jain, K. (2014). Appraisal of Steel Fibers as Minimum Shear Reinforcement in Concrete Beams. ACI Structural Journal, 111(5), 1191–1202. DOI: https://doi.org/10.14359/51686969
Singh, H. (2017). Steel Fiber Reinforced Concrete. Springer Singapore. DOI: https://doi.org/10.1007/978-981-10-2507-5
Souza, D. A., Melo, A. H. V., DIAS, G. S., Vasconcelos, C. V. S. A., & Barboza, A. S. R. (2018). Avaliação do comportamento no pós fissuração de concreto com reforço híbrido de fibras. In Instituto Brasileiro do Concreto, 60º Congresso Brasileiro do Concreto [Anais]. 60º Congresso Brasileiro do Concreto, Foz do Iguaçu, Brasil.
Susetyo, J., Gauvreau, P., & Vecchio, F. J. (2011). Effectiveness of Steel Fiber as Minimum Shear Reinforcement. ACI Structural Journal, 108(4). DOI: https://doi.org/10.14359/51682990
Tabatabaeian, M., Khaloo, A., Joshaghani, A., & Hajibandeh, E. (2017). Experimental investigation on effects of hybrid fibers on rheological, mechanical, and durability properties of high-strength SCC. Construction and Building Materials, 147, 497–509. DOI: https://doi.org/10.1016/j.conbuildmat.2017.04.181
Torres, J. A., & Lantsoght, E. O. L. (2019). Influence of Fiber Content on Shear Capacity of Steel Fiber-Reinforced Concrete Beams. Fibers, 7(12), 102. DOI: https://doi.org/10.3390/fib7120102
Yazdanbakhsh, A., Altoubat, S., & Rieder, K. A. (2015). Analytical study on shear strength of macro synthetic fiber reinforced concrete beams. Engineering Structures, 100, 622–632. DOI: https://doi.org/10.1016/j.engstruct.2015.06.034
Zhang, C., Han, S., & Hua, Y. (2018). Flexural performance of reinforced self-consolidating concrete beams containing hybrid fibers. Construction and Building Materials, 174, 11–23. DOI: https://doi.org/10.1016/j.conbuildmat.2018.04.075
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Isabela Ereno da Silva, Isabela de Gois Laufer, Gustavo Savaris, Rodnny Jesus Mendoza-Fakhye, Carlos Eduardo Tino Balestra, Ana Claudia Bergmann
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The Copyright Declaration for articles published in this journal is the author’s right. Since manuscripts are published in an open access Journal, they are free to use, with their own attributions, in educational and non-commercial applications. The Journal has the right to make, in the original document, changes regarding linguistic norms, orthography, and grammar, with the purpose of ensuring the standard norms of the language and the credibility of the Journal. It will, however, respect the writing style of the authors. When necessary, conceptual changes, corrections, or suggestions will be forwarded to the authors. In such cases, the manuscript shall be subjected to a new evaluation after revision. Responsibility for the opinions expressed in the manuscripts lies entirely with the authors.
This journal is licensed with a license Creative Commons Attribution-NonCommercial 4.0 International.
