High-Performance Audio Power Amplifier with a Push-Pull Voltage Amplification Stage and Active Loads in the Input Differential Pair

High-Performance Audio Power Amplifier with a Push-Pull Voltage Amplification Stage and Active Loads in the Input Differential Pair

Authors

DOI:

https://doi.org/10.5433/1679-0375.2025.v46.51473

Keywords:

power amplifier, symmetrical, complementary, push-pull, active loads

Abstract

The paper proposes an innovative way to connect a differential stage with a current mirror as its load to a voltage amplification stage (VAS) without using gain-limiting resistors, employing a "buffer-bias" stage to stabilize the VAS current and preserve circuit performance. The effectiveness of the proposed topology was demonstrated through measurements on a functional prototype, which exhibited high amplifier performance, such as a total harmonic distortion of 0.0008% at 1 kHz even at full power (50WRMS) and a slew rate of 107.4V/μs.

Downloads

Download data is not yet available.

Author Biographies

Alexandre Saciotto Levorato, Universidade Federal de São Carlos

Undergraduate student, Department of Electrical Engineering, Federal University of São Carlos, São Carlos, São Paulo, Brazil.

Carlos Alberto de Francisco, Universidade Federal de São Carlos

Professor with Doctorate, Department of Electrical Engineering, Federal University of São Carlos, São Carlos, São Paulo, Brazil.

References

Abidi, A. A. (1988). On the operation of cascode gain stages. IEEE Journal of Solid-State Circuits, 23(6), 1434-1437. https://picture.iczhiku.com/resource/eetop/SyItspADyWfjSNVc.pdf DOI: https://doi.org/10.1109/4.90043

Analog Devices. (2025). LTspice XVII. Versão 17.2.4. https://www.analog.com/ltspice

Artalabs. (2019). ARTA versão 1.92. https://www.artalabs.hr/download.htm

Bilotti, A., & Mariani, E. A. (1975). Noise characteristics of current mirror sinks/sources. IEEE Journal of Solid-State Circuits, 10(6), 516-524. https://doi.org/10.1109/JSSC.1975.1050652 DOI: https://doi.org/10.1109/JSSC.1975.1050652

Bortoni, R., & Silva, H. S. (2003). Loudspeakers' electric models for study of the efforts in audio power amplifiers. In AES Convention Peper, [Conference]. 115th Convention, New York. https://www.researchgate.net/publication/282705311_Loudspeakers'_Electric_Models_for_Study_of_the_Efforts_in_Audio_Power_Amplifiers

Chessman, M., & Sokal, N. (1976). Prevent emitter-follower oscillation. Electronic Design, 24(13), RR3-1-RR3-4. https://www.hifisystemcomponents.com/downloads/articles/Prevent-Emitter-Follower-Oscillation.pdf

Cordell, B. (2019). Designing Audio Power Amplifiers. Routledge. https://books.google.com.br/books?id=KBLtvwEACAAJ

Duncan, B. (1996). High performance audio power amplifiers. Elsevier.

Dymond, H., & Mellor, P. H. (2010). Analysis of Two-Pole Compensation in Linear Audio Amplifiers. In AES Convention Peper, [Conference]. 129th Convention of the Audio Engineering Society, New York. https://research-information.bris.ac.uk/en/publications/analysis-of-two-pole-compensationin-linear-audio-amplifiers

Harrison, L. T. (2005). Current Sources and Voltage References. Elsevier.

Kaye, Z. (2020). Selecting capacitors to minimize distortion in audio applications. Analog Design Journal, 1-6. https://www.ti.com/lit/an/slyt796a/slyt796a.pdf

Locanthi, B. N. (1967). An ultra-low distortion direct-current amplifier. Journal of the Audio Engineering Society, 15(3). https://pearl-hifi.com/06_Lit_Archive/15_Mfrs_Publications/Harman_Int'l/AES-Other_Publications/Ultra_low_Distortion_DC_Amplifier.pdf

Revox B 242 | hifi-wiki.com. (2019). https://hifi-wiki.com/index.php/Revox_B_242

Roberge, J. K. (1975). Operational Amplifiers: Theory and Practice (Vol. 197). Wiley New York. https://web.mit.edu/6.101/www/reference/Op_Amps_J_Roberge.pdf

Sedra, A. S., & Smith, K. C. (2019). Microelectronic Circuits. Oxford University Press.

Self, D. (2013). Audio Power Amplifier Design (6th). Routledge. https://doi.org/10.4324/9780240526140 DOI: https://doi.org/10.4324/9780240526140

Slone, G. R. (1999). High-Power Audio Amplifier Construction Manual. McGraw Hill Professional.

Texas Instruments. (2000). SNVS746E: LM134/LM234/LM334 3-Terminal Adjustable Current Sources. https://www.ti.com/lit/ds/symlink/lm134.pdf

Visintin, R. M., Ferreira, R. H. C., Santos, V. C. M., & Francisco, C. A. (2022). A design methodology for audio amplifiers with no global negative feedback: proposal and validation. Semina Ciências Exatas e Tecnológicas, 43(2), 105-114. https://doi.org/10.5433/1679-0375.2022v43n2p105 DOI: https://doi.org/10.5433/1679-0375.2022v43n2p105

Wilson, B. (1981). Current mirrors, amplifiers and dumpers. Wireless World, 71(12), 47-50. https://audiofaidate.org/it/articoli/Current_mirrors.pdf

Downloads

Published

2025-07-08

How to Cite

Saciotto Levorato, A., & de Francisco, C. A. (2025). High-Performance Audio Power Amplifier with a Push-Pull Voltage Amplification Stage and Active Loads in the Input Differential Pair. Semina: Ciências Exatas E Tecnológicas, 46, e51473. https://doi.org/10.5433/1679-0375.2025.v46.51473

Issue

Section

Engineerings
Loading...