Physical characterization of coffee after roasting and grinding
DOI:
https://doi.org/10.5433/1679-0359.2014v35n4p1813Keywords:
Physical properties, Post-harvest, Flowability.Abstract
Flowability is an important characteristic of handling process for efficiency and reliability purpose of post-harvest operations, which are governed by the physical properties of the product. Physical properties determination is an important factor for formulation of machinery projects and sizing of post-harvest operations, which may impact considerably on the products quality, influencing directly the operation cost and company profit. Thus, the objective of this work was to evaluate and determinate some physical properties (repose angle, unit and bulk density, porosity and color coordinates, particle size, moisture content, water activity, angle of internal friction and effective angle of internal friction) of coffee, such as to evaluate the influence of different roast and grinding degrees over these properties. Crude grain coffee (Coffea canephora and Coffea arabica), dehulled and dried were used. These were roasted at two levels: medium light and medium-dark brown, which Agtron numbers are, respectively, SCAA#65 and SCAA#45. After roasting process, grains were grinded at three particle sizes (thin, medium and thick). Both particle size and roast degree significantly affected physical properties of coffee. Coffee samples roasted at medium dark level obtained lower values of moisture content, water activity, repose angle, bulk and real density. Coffee samples grinded at level thin presented an increase of angle of internal friction and effective angle of internal friction, repose angle, bulk and real density, porosity and decrease of water activity values.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Semina: Ciências Agrárias
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Semina: Ciências Agrárias adopts the CC-BY-NC license for its publications, the copyright being held by the author, in cases of republication we recommend that authors indicate first publication in this journal.
This license allows you to copy and redistribute the material in any medium or format, remix, transform and develop the material, as long as it is not for commercial purposes. And due credit must be given to the creator.
The opinions expressed by the authors of the articles are their sole responsibility.
The magazine reserves the right to make normative, orthographic and grammatical changes to the originals in order to maintain the cultured standard of the language and the credibility of the vehicle. However, it will respect the writing style of the authors. Changes, corrections or suggestions of a conceptual nature will be sent to the authors when necessary.
