Computer-aided design of a coffee-dragging device
DOI:
https://doi.org/10.5433/1679-0359.2014v35n5p2373Palavras-chave:
Coffee Harvest, Dragging prototype, CAD simulation.Resumo
Dragging is the most costly and time-consuming stage of the coffee harvest. Therefore, its mechanization is important. The objectives of this study were to design, build, and evaluate the dynamics of a coffee-dragging device in a laboratory setting. The prototype consists of a dragging device with rods mounted on a metal plate and a chassis. Computer-aided design (CAD) software was used to generate a solid second-order tetrahedral mesh for use in finite element analyses of the device and its parts. It was possible to simulate and display the device’s errors and failures and generate data on part deformities, Von Mises tension, and equivalent efforts. Equations based on the Denavit–Hartenberg theory were developed to describe the dragging device kinematics, and the results obtained with these equations were compared to those for the design developed using the software program. A preliminary drawing analysis identified a lever-type system as the best configuration for the device, based on its simple construction and its ability to balance the weight of the project parts. The safety factor achieved was greater than 28. Adjustment of the vibration amplitude of the rods is possible using the eccentric shaft of the connecting rod drive. Finite element analyses was used to analyze the connecting rod and predict the likely failure points.
Downloads
Downloads
Publicado
Como Citar
Edição
Seção
Licença
Copyright (c) 2014 Semina: Ciências Agrárias
Este trabalho está licenciado sob uma licença Creative Commons Attribution-NonCommercial 4.0 International License.
Semina: Ciências Agrárias adota para suas publicações a licença CC-BY-NC, sendo os direitos autorais do autor, em casos de republicação recomendamos aos autores a indicação de primeira publicação nesta revista.
Esta licença permite copiar e redistribuir o material em qualquer meio ou formato, remixar, transformar e desenvolver o material, desde que não seja para fins comerciais. E deve-se atribuir o devido crédito ao criador.
As opiniões emitidas pelos autores dos artigos são de sua exclusiva responsabilidade.
A revista se reserva o direito de efetuar, nos originais, alterações de ordem normativa, ortográfica e gramatical, com vistas a manter o padrão culto da língua e a credibilidade do veículo. Respeitará, no entanto, o estilo de escrever dos autores. Alterações, correções ou sugestões de ordem conceitual serão encaminhadas aos autores, quando necessário.
