Microencapsulation of hydrosoluble extract of babassu nut press cake
DOI:
https://doi.org/10.5433/1679-0359.2020v41n5supl1p2117Keywords:
Drying, Encapsulant, Orbignya phalerata., Planning.Abstract
Orbignya phalerata Mart. has great socio-economic value, originating various products and by-products; however, there are few studies about obtaining food products from of this raw material. In face of that reality, this study aimed to obtain powder extract from press cake of the babassu nut kernel, and to verify the influence of varying concentrations of Maltogill®10 and drying temperature on process yield through a factorial design, as well as to characterize the final product. Babassu nut used for pressing and acquisition of residual press cake and extract. Spray dryer was used to obtain the powder extract, which adopted a rotating central composite design (RCCD with 11 trials). The final product was characterized by analyses of moisture, solubility, hygroscopicity, water activity and bulk density. The experimental design showed significant influence (p ? 0.05) for the variables inlet temperature in the linear and quadratic models, focusing only on the linear term and the interaction between them, the model adjusted in planning was considered predictive; the best productivity obtained (80.37%), was for the temperature of 95°C with encapsulating agent of 18%. With respect to the powder product analysis, low moisture values, hygroscopicity, and density were observed, as solubility and water activity within the recommended parameters.Downloads
References
Arévalo-Pinedo, A., Ribeiro, C. L., Costa, A. A., Santana, A. A., Maciel, V. B. V., & Carvalho, K. M. (2005). Processing and stability studies of babassunut milk. Anais do Simpósio Internacional de Tendências e Inovações em Tecnologia de Óleos e Gorduras, Florianópolis, SC, Brasil.
Association off Official Agricultural Chemists (2005). Official methods of analysis of Association of Official Agricultural Chemists (17nd ed., pp. 1410). Washington: AOAC International Method.
Astolfi, Z., Fº., Souza, A. C., Reipert, É. C., & Telis, V. (2005). Encapsulação de suco de maracujá por co-cristalização com sacarose: cinética de cristalização e propriedades físicas. Food Science and Technology, 25(4) 795-801. doi: 10.1590/S0101-20612005000400027
Azeredo, H. D. (2008). Encapsulação: aplicação à tecnologia de alimentos. Alimentos e Nutrição Araraquara, 16(1), 89-97.
Barbosa, S. J. (2010). Qualidade de suco em pó de mistura de frutas obtido por spray drying. Dissertação de mestrado, Universidade Estadual de Montes Claros, Montes Claros, MG, Brasil. Recuperado de http:// www.dominiopublico.gov.br/pesquisa/DetalheObraForm.do?select_action=&co_obra=204064
Cai, Y. Z., & Corke, H. (2000). Production and properties of spray dried amaranthus betacyanin pigments. Journal of Food Science, 65(7), 1248-1252. doi: 10.1111/j.1365-2621.2000.tb10273.x
Cano-Chauca, M., Stringheta, P. C., Ramos, A. M., & Cal-Vidal, J. (2005). Effect of the carriers on the microstructure of mango powder obtained by spray drying and its functional characterization. Innovative Food Science & Emerging Technologies, 6(4), 420-428. doi: 10.1016/j.ifset.2005.05.003
Companhia Nacional de Abastecimento (2019). Babaçu-Amêndoa. Recuperado de www.conab.gov.br/ OlalaCMS/uploads/arquivos/14_01_13_17_02_22_babacuamendoadezembro2013.pdf
Di Giorgio, L., Salgado, P. R., & Mauri, A. N. (2019). Encapsulation of fish oil in soybean protein particles by emulsification and spray drying. Food Hydrocolloids, 87, 891-901. doi: 10.1016/j.foodhyd.2018. 09.024
Diniz, A. C., Luiz, M. B., Gonzaga, L. V., Meier, M. M., Szpoganicz, B., & Fett, R. (2005). Comportamento da beta-ciclodextrina adicionada ao leite de cabra submetido ao processo de desidratação por" spray-dryer". Ciência e Tecnologia de Alimentos, 25(2), 197-201. doi: 10.1590/S0101-20612005000200002
Eastman, J. E., & Moore, C. O. (1984). Cold-water-soluble granular starch for gelled food compositions. U.S. Patent 4465702.
Fadini, A. L., Dutra Alvim, I., Paganotti, K. B. D. F., Bataglia da Silva, L., Bonifácio Queiroz, M., Miguel, A. M. R. D. O., & Rodrigues, R. A. F. (2019). Optimization of the production of double-shell microparticles containing fish oil. Food Science and Technology International, 25(5), 359-369. doi: 10. 1177/1082013219825890
Fernandes, F. M., & Mançú, J. S. (2016). A importância dos aspectos ambientais na logística para o desenvolvimento de produtos verdes. [s. l.]: Educação, Tecnologia e Cultura-ETC.
Ferrari, C. C., Germer, S. P. M., Alvim, I. D., Vissotto, F. Z., & Aguirre, J. M. de. (2012). Influence of carrier agents on the physicochemical properties of blackberry powder produced by spray drying. International Journal of Food Science & Technology, 47(6), 1237-1245. doi: 10.1111/j.1365-2621. 2012.02964.x
Gharsallaoui, A., Roudaut, G., Chambin, O., Voilley, A., & Saurel, R. (2007). Applications of spray-drying in microencapsulation of food ingredients: An overview. Food Research International, 40(9), 1107-1121. doi: 10.1016/j.foodres.2007.07.004
Goula, A. M., & Adamopoulos, K. G. (2004a). Spray drying of tomato pulp: effect of feed concentration. Drying Technology, 22(10), 2309-2330. doi: 10.1081/DRT-200040007
Goula, A. M., & Adamopoulos, K. G. (2005b). Spray drying of tomato pulp in dehumidified air: I. The effect on product recovery. Journal of Food Engineering, 66(1), 25-34. doi: 10.1016/j.jfoodeng.2004.02.029
Ishimoto, F. Y., Harada, A. I., Branco, I. G., Conceição, W. A. dos, & Coutinho, M. R. (2007). Aproveitamento alternativo da casca do maracujá-amarelo (Passiflora edulis f. var. flavicarpa Deg.) para produção de biscoitos. RECEN-Revista Ciências Exatas e Naturais, 9(2), 280-292.
Largo Avila, E., Cortes Rodríguez, M., Velásquez, C., & José, H. (2015). Influence of Maltodextrin and Spray Drying Process Conditions on Sugarcane Juice Powder Quality. Revista Facultad Nacional de Agronomía Medellín, 68(1), 7509-7520. doi: 10.15446/rfnam.v68n1.47839
Leite, J. T. D. C., Murr, F. E. X., & Park, K. J. (2005). Transições de fases em alimentos: influência no processamento e na armazenagem. Revista Brasileira de Produtos Agroindustriais, 7(1), 83-96.
Ministério da Saúde (2005). Agência Nacional de Vigilância Sanitária. Resolução da Diretoria Colegiada - RDC n.272, de 22 de setembro de 2005. Dispõe sobre o “Regulamento técnico para produtos de vegetais, produtos de frutas e cogumelos comestíveis”. Diário Oficial da União, Poder Executivo Brasília, DF, 23 set 2005. Seção 1. Recuperado de http://www.anvisa.gov.br
Oliveira Borges, J. de, Siqueira, J. C. de, Diniz, H. C., Carvalho, R. A. de, Bomfim, M. A. D., Ribeiro, F. B.,... Sousa, T. V. R. de. (2017). Effect of shed rooftype and babassu pie on the productive characteristics of meat quails. Semina: Ciências Agrárias, 38(4), 2001-2017. doi: 10.5433/1679-0359. 2017v38n4p2001.
Oliveira, M. I. S., Tonon, R. V., Nogueira, R. I., & Cabral, L. M. C. (2013). Estabilidade da polpa de morango atomizada utilizando diferentes agentes carreadores. Brazilian Journal of Food Technology, 16(4), 310-318. doi: 10.1590/S1981-67232013005000037
Rocha, É. M., Sousa, S. L., Costa, J. D. P. da, Rodrigues, S., Afonso, M. R., & Costa, J. da. (2014). Obtenção de suco de caju atomizado através do controle das condições de secagem. Revista Brasileira de Engenharia Agricola e Ambiental-Agriambi, 18(6), 646–651. doi: 10.1590/S1415-43662014000600012
Rodrigues, M. I., & Iemma, A. F. (2005). Planejamento de experimentos e otimização de processos: uma estratégia sequencial de planejamentos.
Rodríguez-Hernández, G. R., González-García, R., Grajales-Lagunes, A., Ruiz-Cabrera, M. A., & Abud-Archila, M. (2005). Spray-drying of cactus pear juice (Opuntia streptacantha): effect on the physicochemical properties of powder and reconstituted product. Drying Technology, 23(4), 955-973. doi: 10.1080/DRT-200054251
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Semina: Ciências Agrárias
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Semina: Ciências Agrárias adopts the CC-BY-NC license for its publications, the copyright being held by the author, in cases of republication we recommend that authors indicate first publication in this journal.
This license allows you to copy and redistribute the material in any medium or format, remix, transform and develop the material, as long as it is not for commercial purposes. And due credit must be given to the creator.
The opinions expressed by the authors of the articles are their sole responsibility.
The magazine reserves the right to make normative, orthographic and grammatical changes to the originals in order to maintain the cultured standard of the language and the credibility of the vehicle. However, it will respect the writing style of the authors. Changes, corrections or suggestions of a conceptual nature will be sent to the authors when necessary.